LIVE TELEMETRYGPT-5$1.25 / $10.00Sonnet 5.5$2.00 / $10.00Gemini 3.8$0.75 / $3.75DS V4.1$0.15 / $0.60RTX 50901,792 GB/sM4 Max546 GB/sUS Avg$0.182/kWh
TELEMETRY CONSOLE NAVIGATION

Guncelkal Telemetry Index

Search VRAM specs, API costs, or Dev tools

Hardware & PowerATX 3.1 + 12V-2x6 Safety

AI Rig & Workstation PSU Wattage Calculator

Prevent random GPU shutdowns by sizing multi-GPU continuous load, ATX 3.1 millisecond power excursions, 12V-2x6 connector safety, and the quiet 50–75% efficiency sweet spot.

Workstation & Multi-GPU Inputs

450 W
1 GPU
170 W
3
35 W
5 %
Recommended PSU
1200W
ATX 3.1 / PCIe 5.1 ready
Continuous Load
760W
63% PSU utilization
Transient Spike
930W
1.4x GPU ms excursion
EFFICIENCY SWEET SPOT TELEMETRYOptimal 50–75% Efficiency Zone
0%50% Peak Efficiency100% (1200W)
ATX 3.1 / 12V-2x6 Rail & Power Cabling Guidance

Requires 1 native 600W 12V-2x6 (H++ ATX 3.1) cable run(s) directly from a PCIe 5.1 PSU — inspect sense pins and fully seat the latch before powering 930W transient GPU peaks. Avoid bending connectors within 35 mm of the GPU header.

ATX 3.1 Power Excursion & 12V-2x6 Cabling Checklist

Multi-GPU inference workstations experience near-instantaneous load jumps from idle (~40W) to 100% Tensor Core saturation (~900W+), tripping legacy single-rail OCP circuits even before average wattage looks close to limit.

PSU Generation / CableSustained Spec100µs Spike MarginWorkstation Fit
ATX 2.x Legacy (8-pin)150W per 8-pin~120% OCP cutoffRequires oversizing by +35% on RTX 40/50 cards
ATX 3.1 / 12V-2x6 (H++)600W Native Cable200% Rated (100µs)Shorter sense pins cut melt risk if unlatched; mandatory for 575W cards
1600W–2000W Multi-GPU2× 12V-2x6 RailsCheck 15A US Outlet!Standard US 15A/120V breakers cap at 1,440W continuous (NEC 80%)

Telemetry Methodology & Benchmark Sources

Read full equations →

Recommended PSU capacity takes the maximum of (Continuous_Load / 0.72) and (GPU_Watts * 1.40 + CPU_Watts * 1.15 + Drives + System_Base) to safely absorb sub-millisecond PCIe 5.1 transient excursions.

Primary Technical & US Grid Benchmarks

  • Intel ATX 3.1 Power Excursion Specification (200% Peak Margin)
  • NVIDIA PCIe 5.1 12V-2x6 Transient Spike Guidelines
  • CLEAResult 80 PLUS Efficiency Load Curves
  • US NEC 80% Continuous Branch Circuit Rule (15A/20A)

Engineering & Pricing FAQ

Why do high-wattage GPUs trip older 750W PSUs even when continuous draw reads 520W?
Modern GPUs trigger 100-microsecond to 10-millisecond power excursions up to 1.5x–2.0x steady TDP during tensor kernel launches, tripping sensitive Over-Current Protection (OCP) on pre-ATX 3.0 supplies.
What is the real difference between ATX 3.0 (12VHPWR) and ATX 3.1 (12V-2x6)?
ATX 3.1 recessed the four sense pins by 1.5 mm and extended the high-current terminal contact length so the GPU drops power delivery immediately if a plug backs out slightly, dramatically reducing thermal connector hazards.
Can I safely use one pigtailed PCIe 8-pin cable split across two sockets on an RTX 3090?
No. Always run independent, dedicated single cables from separate modular PSU sockets for every 8-pin or 12V-2x6 input above 225W to avoid overloading 18 AWG wire leads and terminal crimp pins.
Will a 1600W Dual-GPU AI rig trip a standard US 15A bedroom wall outlet?
Per National Electrical Code (NEC) continuous load rules, a 15A / 120V breaker supports 1,440W continuous (1,800W peak × 80%). Sustaining dual 450W GPUs plus CPU overhead demands either undervolting/power-limiting GPUs or plugging into a 20A/240V circuit.
Why aim for 50%–75% load instead of running a PSU at 92% utilization?
Switching PSUs hit peak efficiency (less waste heat) and keep zero-RPM or low-RPM fans silent near 50%–65% rated capacity while leaving clean headroom for summer ambient temperatures and capacitor aging.

Continue in Console Workflow

AI & LLM Economics

Local LLM VRAM Checker

Test Llama 70B, Qwen 32B, or DeepSeek R1 across RTX 3090/4090/5090 & Apple Silicon Macs with GQA KV-cache math and tokens/sec speed.

Open Workbench
Hardware & Power

kWh Power Cost Lab

Calculate daily, monthly, and annual kWh bills using 80+ PSU efficiency, duty cycle, optional AC cooling load, and 50 US state EIA rates.

Open Workbench
Hardware & Power

NAS & RAID Storage

Model mixed-drive Synology SHR tiers, ZFS RAIDZ1/2/3 80% pools, true binary TiB vs. marketing TB, and fault tolerance.

Open Workbench